Original Accessories/Auxiliary Equipment; Operation; Fitting/Changing The Saw Blade; Connecting The Sawdust Extraction Device - Parkside PTSS 1200 A1 Originalbetriebsanleitung

WARNING! DANGER DUE TO DUST
EXPOSURE!
► When working for extended periods of time
on wood and, in particular, materials that
produce dust which is hazardous to health,
connect the appliance to an appropriate
external dust extraction appliance.
Wear protective gloves!
Wear a dust mask!
Wear safety goggles!
Wear ear protectors!
■ Do not allow the teeth of the saw blade to
overheat.
■ When sawing plastic, avoid melting the plastic.
WARNING! TOXIC FUMES!
► Working with the tool can produce harmful/
toxic dusts that represent a health hazard for
the person operating the appliance and for
any other people in the area.
■ Materials containing asbestos may not be pro-
cessed. Asbestos is a known carcinogen.
Original accessories/auxiliary
equipment
■ Use only the additional equipment and
accessories specified in the operating instruc-
tions. Using attachments or accessory tools
other than those recommended in the operating
instructions can lead to a risk of injury.
■ Only the original guide rails may be used.
■ All blades used should conform to EN 847-1.
PTSS 1200 A1

Operation

Fitting/changing the saw blade

Always remove the plug from the power socket
before working on the appliance.
1. Activate the safety lock-out
motor unit forwards.
2. Open the clamping lever
lock-out . The motor unit clicks into place.
3. The clamping screw/washer
tion .
14 b
4. Press the spindle lock button
Hex key to open the clamping screw/
washer .
14a
5. Remove saw blade
6. Fitting a saw blade
reverse order.
WARNING!
► The direction of rotation of the saw blade
and the machine must match.
Connecting the sawdust extraction
device
♦ If required, attach the adapter for dust extrac-
tion to the chip ejector
♦ Connect an approved dust and chip extraction
device.
Check that the blade guard is
functioning
NOTE
► Position the base plate for this operation on
the edge of a stable surface so that the saw
blade can be lowered.
♦ Lower the circular saw.
♦ Check whether the saw blade
the blade guard and whether it moves back to
its starting position automatically.
and push the
. Release the safety
is now in posi-
14a
and use the
.
is carried out in the
.
rubs against
GB
IE
7