Original Accessories/Auxiliary Equipment - Parkside PDT 40 D3 Originalbetriebsanleitung

■
Keep children and bystanders away while
operating the staple gun. Distractions can
cause you to lose control.
■ Stay alert, watch what you are doing and use
common sense when operating the staple gun.
Do not use a staple gun while you are tired
or under the influence of drugs, alcohol or
medication.
A moment of inattention while operating the
staple gun may result in serious personal injury.
■ Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the staple gun in unexpected situations.
■ Disconnect the appliance from the compressed
air source before starting any repairs or mainte-
nance work and before transportation.
■ RISK OF INJURY!
Do not use the appliance when working on
scaffolding or ladders.
■ Never use hydrogen, oxygen, carbon dioxide
or other gas in cylinders as an energy source
for this tool, as this could lead to an explosion
and thereby cause serious injuries.
■ RISK OF INJURY!
Do not operate the appliance if the trigger
lock is damaged. Failure to do this can lead
to serious injury.
■ When undoing the hose coupling, hold the hose
firmly in your hand to prevent injuries caused
by a thrashing hose.
■ Always use a ¼" threaded nipple and quick
release for the compressed air connection.
■ Never place your hands in the vicinity of the
opening if the appliance is ready for use.
Failure to do this can lead to serious injury.
PDT 40 D3
■
Ensure there is no damage.
Check the appliance for any possible defects
before use. If the appliance exhibits any faults,
it should not be used under any circumstances.
■ Do not use any sharp or pointed objects.
Never insert any sharp and/or metallic objects
into the appliance.
■ The compressed air driven staple gun may only
be connected to lines, in which it is ensured that
the maximum permissible pressure cannot be
exceeded by more than 10%, e.g. by means of
a pressure control valve built into the compressed
air line (pressure reducing valve) with a down-
stream or built-in pressure relief valve.
■ When using a compressed air driven staple
gun, make sure that the maximum pressure is
not exceeded.
■ The compressed air driven staple gun may only
be operated at the required pressure for the re-
spective operation to avoid unnecessarily high
noise levels, increased wear and consequent
errors.
WARNING! RISK OF FIRE AND
EXPLOSION!
► Never operate the compressed air driven
staple gun with oxygen or combustible gases
under pressure.
Original accessories/auxiliary
equipment
■ Use only the additional equipment and acces-
sories specified in the operating instructions.
Using fastenings or accessory tools other than
those recommended in the operating instruc-
tions can lead to a risk of injury.
■ Have your compressed air tool serviced by
a qualified repair person using only original
replacement parts. This ensures that the safety
of the compressed air tool is maintained.
GB│MT 39 ■
│