Matching A Nail Set; Application Of The Uv-Gel - Silvercrest SNS 45 B4 Bedienungsanleitung

Matching a nail set

GB
IE

Application of the UV-Gel

20
Carefully file the transitions from the nail tips
Sandpaper file , until they conform to the contour of the natural nail. File
only the nail tips
Carefullly file the sides of the nail with the Sandpaper file
and does not exhibit a "wing".
File the nail tip first with the sandpaper file
block . The nail tip
Repeat this step for each individual nail.
Remove the dust from filing with a paper cloth or cellulose pad
Using the brush
excess on one side of the brush
Apply a thin coating of UV-Gel
UV Gel to the lower part of the nail, as hereby is how the offset between
the natural and the artificial nail is created. Furthermore, the transition from
natural to artificial nails is especially sensitive to pressure and knocks, thus
more UV Gel must be applied here.
INFORMATION
► When you are doing the application do not press too heavily on the brush
since the brush could otherwise cause streaking.
► Model the first layer of the UV Gel
future shape of the nail. Model the best possible natural nail shape.
Maintain a distance of about 1 mm from the cuticle during the application.
! Do not damage your natural nail.
should no longer shine.
, take a small amount of UV Gel
off on the edge the UV Gel pot.
onto the complete nail. Apply a little more
very carefully, as this determines the
to the natural nails with the
until it is straight
and then with the sanding
.
and then wipe the
SNS 45 B4
,