Connecting A Playback Device Using A Cinch Cable; Pairing The Device With A Bluetooth Playback Device - Silvercrest SSTB 10 A1 Bedienungsanleitung Und Sicherheitshinweise

Connecting a playback device using a cinch cable

Connect the audio input jacks R and L
♦
an audio cinch cable with the corresponding audio output sockets on the
external audio device. Make sure that the red and white colour markings
correspond.
♦ To switch on the device, press the
Press the FUNCTION button
♦
the remote control repeatedly until
♦ Switch on the connected playback device and start playback.
NOTE
► If both the AUX 1 socket
external playback devices, the music will be played back via the AUX 1
socket
3.5 mm jack cable from the AUX 1 socket
Pairing the device with a Bluetooth
To play audio files via Bluetooth
paired with a compatible Bluetooth
♦ Press the
Press the FUNCTION button
♦
once to activate the Bluetooth
and the flashing
♦ Set up the Bluetooth
Bluetooth
found in the operating instructions for your Bluetooth
♦ Select the entry SSTB 10 A1 from the list of found devices on your
Bluetooth
to connect the two devices. If the pairing is successful, you will hear a
signal and the
■ 12 │
GB
and the AUX 2 socket
by default. To use the AUX 2 socket
button ( or ) to switch the device on.
icon indicates that the device is ready for pairing.
® playback device so that it searches for other
devices. A detailed description of how to do this can be
®
playback device and, if required, enter the code "0000",
®
icon appears on the display
on the rear of the device using
button ( or
on the device or the AUX button
appears on the display
are connected to
, simply disconnect the
.
®
playback device
, the device must previously have been
®
playback device.
®
on the device repeatedly or the
function. appears on the display
®
.
).
on
.
button
playback device.
®
SSTB 10 A1