Herunterladen Inhalt Inhalt Diese Seite drucken

Accepting Calls; Playing Music Using The Cable - Silvercrest SBLS 6 A1 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

BB58B%OXHWRRWKB6SHDNHUB[:B%ERRN 6HLWH  'RQQHUVWDJ  -XOL   
3. Switch on the audio device (e.g. smartphone) and start the Bluetooth
connection. The audio device will now receive the device identifica-
tion "SBLS|6|A1".
4. Establish a connection to the Bluetooth speaker on the audio de-
vice. Both devices are now interconnected. The LED|3 on the de-
vice flashes blue and an acoustic signal sounds.
NOTE: it is possible that audio devices remember the identification
of the device. Thus it is possible that a new manual connection estab-
lishment is not required while the Bluetooth function is active.
5. Now play a song on the audio device. The sound is reproduced
via the loudspeakers|5.

7.2 Accepting calls

If the device is connected to a smartphone it is possible for you to
accept calls. The ring tone is reproduced via the loudspeakers|5 and
the music stops playing.
NOTES:
• For some mobile phones you have to choose Bluetooth as audio
source when accepting a call.
• It is possible, that not all of the functions will be supported by all
mobile phones.
1. Press the button
2. Adjust the volume during the telephone call using the buttons
|1 /
|4.
3. Short press the button
call. If you have accepted the call while the music was playing,
the song will continue to be played after ending the call.

7.3 Playing music using the cable

NOTE: if there is a device connected via a cable, this connection has
priority over the Bluetooth connection. A possibly existing Bluetooth
connection will be interrupted. Phone calls can no longer be made
wireless.
1. Plug the TRS connector of the 3.5 mm stereo jack cable|10 into
the headphone socket of the sound source (e.g. MP3 player, tele-
phone) and the socket AUX|8 on the device.
2. Switch on the sound source.
3. Switch on the device using the ON/OFF|9 switch. The LED|3 is lit
green. An acoustic signal sounds. Then the LED|3 flashes green.
50
GB
|2 to accept the call.
|2 during the telephone call to end the

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis