Alignment Of The Motion Detector - LIVARNOLUX LSLB 10 B2 Bedienungsanleitung

♦ Replace the cover of the connection box
place .
♦ You can now switch the power supply back on .
L N
Fig . connection diagram

Alignment of the motion detector

When aligning the motion detector
range does not include any undesired areas, such as streets or lights .
Ensure that no objects block the line of sight between the motion
detector and any possible trigger .
♦ Align the motion detector
♦ Undo the locking screw
cally .
♦ Align the motion detector
screw .
■ 12 │ GB │ IE │ NI
Brown or black wire (L)
Blue wire (N)
Green/yellow wire ( )
, make sure that the detection
horizontally by turning it .
to adjust the motion detector
and then re-tighten the locking
and screw it firmly into
verti-
LSLB 10 B2