Troubleshooting; Maintenance - LIVARNOLUX LSLB 10 B2 Bedienungsanleitung

Troubleshooting

The light does not switch on
♦ Correct the light sensitivity using the LUX control
range using the SENS control
♦ An object is blocking the line of sight between the motion detector
and a possible trigger .
♦ The electrical connection is defective . Have the electrical connec-
tion repaired by an authorised electrician or contact the service
hotline (see section "Service") .
The light does not switch off
♦ There are objects or people in the detection range of the motion
detector that are possibly being repeatedly detected by the
motion detector
♦ The motion detector
movement in strong winds . Install the appliance on a stable
mounting surface .

Maintenance

The light source cannot be replaced . The appliance contains a long-
life LED .
The light source in this light cannot be replaced . Once the light source
has reached the end of its lifespan, you need to replace the whole light .
■ 14 │ GB │ IE │ NI
.
. Remove these if possible .
can sometimes be activated by its own
and/or the
LSLB 10 B2