Cleaning And Care; Cleaning With The Brush - Silvercrest SRR 3.7 D5 Bedienungsanleitung

Cleaning and care

DANGER – ELECTRIC SHOCK!
► Before cleaning the appliance, disconnect the power plug from
the mains power socket! There is a risk of electric shock!
CAUTION! MATERIAL DAMAGE!
► Do not use abrasive, chemical or caustic cleaning agents to
clean this appliance. This will irreparably damage the appliance.

Cleaning with the brush

Cutting unit
Clean the 3 shaving heads 3 of the cutting unit 2 after every
shave using the brush r.
1) Pull the cutting unit 2 upwards and off the appliance. To do this,
grip the ridged areas on the side of cutting unit 2.
2) Tap the cutting unit 2 on a fl at surface or blow off the hair
cuttings.
3) Use the brush r to remove any remaining hair cuttings.
Trimmer unit
Clean the trimmer unit after every shave using the supplied brush r.
■
Oil the long hair trimmer 7 around every 6 months with a drop
■
of sewing machine oil.
SRR 3.7 D5
GB │ CY │
15 ■