F.lli Consonni Bim Bam 241-840 Bedienungsanleitung Seite 56

F.lli Consonni
50
10. Care and Maintenance
Your Consonni clock requires very little care and maintenance.
Listed below are some steps you can take to maintain the function and appearance of your clock
for many years:
{ Wind your clock regularly (every seven days).
{ Keep the door closed.
{ Check periodically to ensure that your clock is hanging level and securely.
{ If applicable check the weights occasionally to ensure that they are still tightly assembled
(hooks and/or loops), are properly hung and (where applicable) the cables run in their guides.
{ Clean and polish your clock cabinet as frequently as you do your other furniture. To retain the
luster of the wood a mild non-silicone liquid or paste wax polish can be used when needed. All
brass components are tarnish proofed with clear laquer and should be wiped with a soft, dry
cotton cloth, only.
{ Kieninger recommends that your clock movement be oiled (synthetic oil No. 859 by Etsyntha)
every five (5) years by an authorized service center and thoroughly cleaned every ten (10) years.
Extreme environmental conditions (air humidity and quality, temperature, etc.) may necessitate
more frequent oiling and/or cleaning.
11. Relocating the clock
When relocating or moving the clock all weights and the pendulum have to be removed from the
clock. To avoid unneccessary damage, you should ensure that all accessories like the pendulum
and the weights are packed in the original packaging (see section 2).
Cable movements have to be wound up completely with weights and the styrofoam blocks
inserted. The weights can be removed afterwards.
The chains of chain movements should be secured with wire to avoid slipping off the chain
wheels during transport. To prevent damage to the case the chain ends should be pace in a plastic
bag.
At the new location, repeat the setup of the clock as previously described.