F.lli Consonni Bim Bam 241-840 Bedienungsanleitung Seite 51

F.lli Consonni
5.3 Setting the date (option)
If your clock has a dial with integrated date feature, observe the following instructions.
Set the date disk with the aid of a pointed tool (pencil or ballpoint pen) engaged in the small holes
above its numerals (picture 9 - see page 25).
If the disk cannot be turned, its shift mechanism is engaged.
Please turn the time back by approximately two hours until the disk can be turned. Set the date
and then reset the hands to the correct time of day.
Fig.8
Secondi
Data
Giorno della
settimana
Setting the Calendar
1. Week day
To set the day, move the minute hand (long hand) clockwise. It is not neccessary to wait for every
chime. After the day is set turn the minute hand 3 more hours.
2. Date and month
Use a screw driver the turn the screw inside the dial. 1 turn of the screw (= 31 days) the next
month is automatically set.
3. Second hand
1 turn = 1 minute
If you want to set your clock after the radio or TV. Let the pendulum swing until the second hand
is on ,,60" stop the pendulum and restart with the signal in the radio or TV.
4. M inute and hour hand
Set the dock to the correct time by moving the minute (longest) hand clockwise or counter-
clockwise. Don't wait for every chime.
After 1 hour the clock will chime the correct time. Avoid touching the n,g hour (shortest) hand.
Do not move same.
The gears of the calender will swift between 11 pm to 2 AM . If your dock shifts between 11 AM
and 2 PM move the hands 12 hours.
45
Figura 9
Vite per la regolazione
Mese
Minuti e ore
5.4