Troubleshooting - Silvercrest STYG 2000 A1 Bedienungsanleitung

Troubleshooting

GB
IE
CY
Defect
The appliance is not
working.
The fat is not
running into the
fat drip tray 3.
The indicator
lamp 6 is illuminat-
ing and going out
again frequently.
The indicator
lamp 6 does not
illuminate.
If the malfunction cannot be corrected with the above suggestions, or if you have determined that the
malfunction may have other causes, please contact our Customer Service.
8
Cause
The mains plug is not connected to the
mains power.
The mains power socket is defective.
The appliance is defective.
The thermostat 5 has not been correctly
inserted into the socket 1.
The appliance is not standing level.
The appliance is maintaining the set tem-
perature level. To do this, it has to heat up
briefl y every so often.
The appliance has now reached the set
temperature.
The thermostat 5 is not inserted into a
mains power socket.
The appliance is defective.
Solution
Insert the plug into a mains
power socket.
Use a diff erent mains power
socket.
In this case, contact Customer
Services.
Push the thermostat 5 into the
socket 1.
Place the appliance on a level
surface.
This is not a defect.
This is not a defect.
Connect the thermostat 5 to a
mains power socket.
In this case, contact Customer
Services.
STYG 2000 A2