Troubleshooting; Technical Specifications; Symbols Used - Silvercrest SEGS 2200 B2 Kurzanleitung

off by the thermostat, you will hear a
click.
• Allow the device to cool down before
you clean it.
Cleaning
DANGER! Risk of electric
shock!
Disconnect the mains plug 7 from the
mains socket before any cleaning.
Never immerse the device in water, and
protect it from drips and splashes.
DANGER! Risk of injury
through burning!
Prior to cleaning, let the device cool
down until there is no longer a risk of
burning.
For additional information on cleaning and
looking after the device and accessories,
please see the online user instructions.
Storage
Keep all parts clean and dry and protect
them from extreme conditions.
Disposal
The packaging and device must be dis-
posed of according to the environmental
regulations of your country.
Trouble-shooting
If your device fails to function as required,
please read the corresponding chapter in
the online user instructions.

Technical specifications

Model: SEGS 2200 B2
Mains voltage: 220 - 240 V ~ 50 - 60 Hz
Protection
class: I
Protection type: IPX4 (protection against
water splashes)
Power rating: 2000 W - 2400 W

Symbols used

Geprüfte Sicherheit (certified
safety). Devices must comply with
the generally acknowledged
rules of technology and the Ger-
man Product Safety Act (Produkt-
sicherheitsgesetz - ProdSG).
With the CE marking,
HOYER Handel GmbH declares
the conformity with EU guide-
lines.
This symbol reminds you to dis-
pose of the packaging in an envi-
ronmentally friendly manner.
Recyclable materials are marked
with the recycling symbol (3 ar-
rows). The material can be speci-
fied by the recycling number in
the centre (here: 21) and/or an
abbreviation (here: PAP).
AC voltage
The symbol identifies parts that
can be cleaned in the dishwasher.
It is a recyclable product which is
subject to an extended producer
responsibility and for which the
rules of waste separation apply.
Subject to technical modifications.
19
GB