Cooking Zones Control - Models Kct 39 - Kaiser KCT 39-series Gebrauchsanweisung

7
1
42
3
2
6
5
COOKING ZONES CONTROL
MODELS KCT 39...
Switching on the Touch Control
x Press the key 1 to activate the control: the
adjustment level indicators 2 and the timer
display 3 are set to "0" while the decimal
points 4 flash.
Perform the next operation within 10 seconds;
otherwise the device will switch off automatically.
Adjusting power and the timer by means of the
(+) and (-) keys.
Use the (+) and (-) keys to adjust the setting of the
plates and the required time on timer / minute
counter.
4
x
The (+) and (-) controls are common to
both functions. Accordingly, to regulate the
power of the hob, first select the zone with
key 5, then adjust the relative power level
using the (+) and (-) keys 6; this done.
x Select the timer function with key 7 and
proceed to set the duration, likewise using
the (+) or (-) key 6.
Switching on the cooking area
Once the device has been activated, switch on the
cooking area (within 10 seconds) as follows:
x Press one of the keys 5 to select the
cooking area required. The relative display
2 will indicate a "0" and the decimal point 4
will illuminate to show that the cooking
area has been activated.
x Use the (+) and (-) keys 6 to adjust the
heat level (from 1 to 9).
Press and hold down these keys to increase or
decrease the setting.
EN