Kaiser KCT 39-series Gebrauchsanweisung Seite 24

EN
Switching OFF an individual cooking zone
To switch off an individual cooking zone, the
respective cooking zone has to be selected with the
cooking-zone-selectkey (+) 1.
The selection is indicated with the static dot in the
respective cooking zone display 2.
If the controlrecognizes that the (+)-key 1 and the (-)-
key 3 have been activated simultaneously the setting
of the selected cooking zone will be put back to "0".
Alternatively, the (-)-key can be used to count down
the setting to "0".
If all cooking zones are at "0", all decimal points in
the cooking zone displays are blinking.
1
If a cooking zone is "hot", "H" will be displayed
instead of "0".
Switching-OFF all cooking zones
Immediate switching-off of all cooking zones can be
2
achieved anytime by means of the ON/OFF key 4.
In the stand-by- mode an "H" appears on all cooking
zones which are "hot".
All other cooking zone displays are not illuminated.
3
Wattage settings
4
The output of the cooking zones can be set in 9
steps which are indicated by the figures "1" thru "9"
by means of LED sevensegment- displays.
Automatic heat-up function
When the automatic heat-up function is activated the
wattage of the cooking zone is at 100% for a certain
heat-up time which is dependent on the selected
(continious) setting.
At the end of the heat-up time the electronic control
switches back to the preselected simmering setting.
24