PANCONTROL PAN IR-T800+ Handbuch Seite 23

Set emissivity level
Set the device with the mode key that only the emission level is displayed. You
can now set the desired value with the ▼ / ▲ buttons. A long press changes
the value quickly.
Press the test button (trigger) to switch on the device and to start the
measurement process.
Set temperature unit
Press the MODE button 2 seconds until the unit °F or °C appears on the
display.
Laser / UV-light
Press the "DOWN"-button to turn off the Laser. Press the "UP"-button to turn
on the UV light.
Refrigerant from air-conditioning fluoresce under UV light. Turn the laser off
and the UV light on. So, you can find leaks in air conditioners.
Surface measurement
Impostare il dispositivo con il tasto mode che consente di visualizzare tutti i
valori (temperatura, umidità e punto di rugiada). Aim with the device on the
surface to be measured and press the measuring button (trigger). Wait until
the value on the display has stabilized, and read off the measured value.
Temperature difference-alarm
Set the device with the mode key displays ambient temperature and surface
temperature.
Measure desired surface.
EN 8