Prevention Of Accidents; Safety, Quality - Frank FH 711 TCC Betriebsanleitung

Take pistol grip in one hand, use the other hand for acuating the switch bolts of the
two integrated switches individually in succession by means of a thin bar. Prevent
the machine from starting when doing this.
Check whether the machine starts in compliance with the regulations when both
bolts are actuated simultaneously.
In case the machine starts when only one bolt is actuated, the spray gun has to be
replaced immediately.
The results of these tests must be recorded in writing.
In addition, where local regulations so require, the machine should be checked for
the observance of the required emission limit values.

12. Prevention of accidents

The machine has been designed as to exclude accidents if used properly. The (Guidelines
for Liquid Spray Appliances) should be observed.
13. Safety, Quality
The manufacturer may only be responsible for effects on safety, reliability, and machine per-
formance, if the machine is used in accordance with the operating instructions.
These operating instructions should be made available to the operator.
49
UK