Commissioning; Initial Commissioning - Frank FH 711 TCC Betriebsanleitung

7.5.5 Fuel oil
Fill up fuel oil tank with extra light type oil.
Close oil inlet using the proper cap.
7.5.6 Cleaning agents
Prepare chemicals in a concentration of 1 : 10 (1 part cleaning agent/10 parts water) or, if
necessary, using a higher concentration in a 25 liter tank. Put full tank into the support. Insert
the appropriate suction hose with filter as deeply as possible into the cleaning agent tank.
7.5.7 Machine hood
The machine must not be operated without the machine hood.
Mount hood according to the instructions and lock in place using the 4 bolts in the head parts
of the hood.
7.6

Commissioning

7.6.1

Initial Commissioning

Loose screws of the spray lance.
Remove spray lance from spray gun.
Set ON-OFF switch to "1".
Actuate control lever of the spray gun and operate and deaerate machine without using the
spray lance, without the oil burner running and without adding chemicals for about 1 minute,
at zero pressure. Connect spray lance and spray gun to the high-pressure hose in a pres-
sure sealed manner.
Set ON/OFF switch to "0"
38