Types; Operating Conditions; Application - Frank FH 711 TCC Betriebsanleitung

1.

Types

FRANK hot-water high-pressure cleaner with electronic safety remote control.
Variant TCA
ON-OFF control of the machine by operating the spray gun.
Variant TCC
ON-OFF control of the machine and program selection by operating the spray gun.
2.

Operating conditions

For reasons of safety only 1 high-pressure cleaner of the variant TCA or TCC may
be operated resp. put up on the work station.
There must be a safety distance of minimum 50 m between high-pressure cleaners
of the variant TCA and/or TCC which are operated on different work stations. This
distance must also be applied for high-pressure hoses and spray appliances.
If work stations with lower distances are required, machines of the variants TCA or
TCC must be combined with machines of the variants TCA 2 or TCC 2 resp. TCA
3 or TCC 3.
Examples:
2 work stations with a shorter distance than 50 m,
TCA combined with TCA 2, or
TCA combined with TCC 2, or
TCC combined with TCC 2.
Maximum 3 work stations with a shorter distance than 50 m,
TCA combined with TCA 2 and TCA 3, or TCA combined with TCA 2 and TCC 3
TCA combined with TCC 2 and TCC 3, or
TCC combined with TCC 2 and TCC 3
3.

Application

The hot water high-pressure cleaner is used for the cleaning, degreasing, conservation, de-
conservation and desinfection of vehicles, machines, machine parts, equipment, tanks, etc.
27
UK