Description Of The Appliance; Before Startup - Kärcher SE 6.100 Originalbetriebsanleitung

Maintenance

Turn off the appliance and remove the
mains plug prior to any care and mainte-
nance works.

To avoid risks, all repairs and replace-
ment of spare parts in the machine may
only be carried out by the authorised cus-
tomer service personnel.

Always use original spare parts and ac-
cessories permitted by the manufacturer
so that the safety of the machine remains
intact.

Description of the Appliance

Illustrations on fold-out
pages!
When unpacking the prod-
uct, make sure that no accessories are miss-
ing and that none of the package contents
have been damaged. If you detect any trans-
port damages please contact your dealer.
Illustration
1 Container
2 Connection, spray hose
3 Filter flap release button
4 Connection for suction hose of the wash
vacuum cleaner
5 Filter dedusting
6 Filter changing display
7 Appliance head
8 Carrying handle
9 Button for vacuuming
10 Spray button
11 Cable and hose hooks
12 Holder for spray suction pipes
13 Container release
14 Flat fold filter *
15 Dirt water reservoir, detachable *
16 Fresh water reservoir, detachable *
17 Spray/suction hose
18 Handle
19 Surrounding air separator
20 Spray lever
21 Lock key for spray mist
22 Lock lever
23 Spray / suction tubes 2 x 0.5 m
14
24 Wash nozzle for carpet cleaning, with
hard surface attachment
25 Wash hand nozzle for upholstery cleaning
26 Carpet cleaner RM 519 (100 ml)
Additional vacuuming accessories
27 Attachment for wet/dry vacuuming
28 Switchable floor nozzle for carpets and
hard floor surfaces
29 Crevice nozzle
30 Upholstery nozzle
31 Filter bag
* already installed in the appliance

Before Startup

Illustration

Turn both releases in the direction of the
arrow, remove the appliance head and
take accessories out of the container.
Illustration

Mount wheels and steering rollers.
Illustration

Attach the accessories holder.

Wet cleaning
(see chapter "Fill wet cleaning/fresh water
reservoir")

Dry vacuum cleaning
(see chapter "Dry vacuuming")

Wet vacuum cleaning
(see chapter "Wet vacuuming")
Illustration

Insert and lock the appliance head.
Illustration

Attach the suction hose and the spray
hose to the connectors on the appliance.
Note: Press the suction hose tightly into
the connector to lock it into place.
Illustration

Connect the spray/suction pipes and attach
to the handle. Center the locking lever when
attaching it, turn clockwise to lock.

Attach the floor nozzle to the spray/suc-
tion pipes and secure with locking lever.
The appliance is now prepared for wet
cleaning.
- 3
EN
Operation
Start up