Description Of The Appliance - Kärcher WD 3 Car Bedienungsanleitung

CAUTION
Pointer to a possibly dangerous
situation, which can lead to mi-
nor injuries.
ATTENTION
Pointer to a possibly dangerous
situation, which can lead to
property damage.

Description of the Appliance

Illustrations on fold-out page!
These operating instructions describe the
multi-purpose vacuum cleaner shown on
the cover page.
When unpacking the product, make sure that no acces-
sories are missing and that none of the package con-
tents have been damaged. If you detect any transport
damages please contact your dealer.
Suction hose connection
 To connect the suction hose during vacuuming. Illustration
ON/OFF switch for appliance
Illustration
 Position I: Suction or blowing
Position 0: Appliance is switched off
Carrying handle
 To carry the appliance or to remove the appliance
head after unlocking.
Cable hook
Illustration
 To store the mains cable.
Blowing connection
Illustration  Connect the suction hose to the blower connection,
this will activate the blower function.
Container closure
Illustration  Pull out to open, push in to lock.
Parking position
Illustration
 To rest the floor nozzle during work interruptions.
12
Accessory mount
Illustration
 The accessories compartment allows the storage
of suction pipes and suction nozzles on the appli-
ance.
Steering roller
 The steering rollers are located in the compartment Illustration
when the appliance is delivered. These must be at-
tached prior to starting up the appliance.
Filter bag
Note: Do not use a filter bag for wet vacuuming!
Illustration
 Recommendation: To vacuum fine dust, use the
filter bag.
Cartridge filter
Illustration
 The cartridge filter must always be installed - with
wet and dry vacuuming.
Note: Let the wet cartridge filter dry prior to using it for
dry vacuuming.
Suction hose with connecting piece
Illustration
 Push the suction hose into the connection on the
 In order to disconnect it, push down with your appliance, it snaps in place.
thumb and pull the suction hose out.
Note: Accessories, such as suction brushes, can be di-
rectly attached to the connecting piece and thus con-
nected to the suction hose.
For convenient working even in tight spaces.
See position 13.
The removable handle can be attached between the ac-
cessories and the suction hose if necessary.
Recommendation: In order to vacuum the floor, attach
the handle to the suction hose.
Removable handle
Illustration
 Connect the handle with the suction hose until it
snaps in place.
Illustration  To remove the handle from the suction hose, press
the notch using your thumb and pull off the handle.
Note: Due to removing the handle, accessories can be
directly attached to the suction hose.
Recommendation: In order to vacuum the floor, attach
the handle to the suction hose.
See position 12.
EN
– 7