Setting The Year / Month / Date / Time / Day Of The Week; Using The 12 / 24-Hour Display; Setting The Alarm; Activating / Deactivating The Alarm - Auriol Z30237C Bedienungsanleitung

note: If the radio-controlled clock cannot pick up
the DCF radio signal on account of an error or the
distance from the transmitter, etc., it is also possible
to set the time manually. As soon as reception of
the DCF signal is successful, the manual settings
are overwritten.
Setting the year / month /
date / time / day of the week
1. Press and keep pressed the WAVE button
approx. 3 seconds. The radio symbol
flashes.
2. Press and keep pressed the WAVE button
again for approx. 3 seconds to stop the recep-
tion of the radio time signal.
3. Press and keep pressed the SET button
approx. 2 seconds. The year display flashes.
4. Set the desired value by pressing the UP
DOWN button .
22
5. Confirm your settings by pressing the SET but-
ton . The month display flashes.
25
6. Repeat steps 4 and 5 to set the values for day,
hour, minute and day of the week.
The following languages are available:
GER = German
FRE = French
SPA = Spanish
ITA = Italian
DAN = Danish
DUT = Dutch
ENG = English

Using the 12 / 24-hour display

Q
While time display
1
UP button to switch between 12- hour and
23
24-hour format.
note: The AM icon
14
mornings in 12-hour format. The PM icon
on the LCD stands for afternoons in 12-hour
format.
8 GB/IE
for
21
2
21
for
25
or
23
is indicated press the
on the LCD stands for
13

Setting the alarm

Press the SET button once or twice to select
25
alarm 1 or alarm 2
15
Press and keep pressed the SET button
about 2 seconds. The hour display flashes.
Press the UP or DOWN button
23
the desired value.
Press the SET button to confirm your setting.
25
The minute display flashes.
Press the UP or DOWN button
23
the desired minute value.
Press the SET button to confirm your setting.
25
Press the SNOOZE button
alarm signal sounds. The alarm signal stops
sounding. The alarm will sound again 5 minutes
after the set waking time or alarm time.
Press any button except the SNOOZE button
to stop the alarm signal sounding.
activating / deactivating the
alarm
Press the ALARM button
24
priate alarm symbol
15
played to indicate that the alarm is activated.
Pressing the ALARM button
the appropriate alarm symbol
to cease to be displayed. The alarm is deacti-
vated.

Switching off the alarm signal

Press any button except the SNOOZE button
to stop the alarm signal sounding. You do not
have to reactivate the alarm. It reactivates itself
automatically according to the weekly rhythm.
note: The alarm signal switches itself off after
2 minutes.
.
16
for
25
to set
22
to set
22
as soon as the
20
20
briefly. The appro-
or is dis-
16
again causes
24
or
15 16
20