Operation; Setting The Time And Date - Auriol IAN 290882 Bedienungs- Und Sicherheitshinweise

Do not dispose of the watch with the household
rubbish.
˜ Operation
Press the MODE button 6 to set the desired
mode: Time mode > Stop watch > Alarm >
Setting the time > Time mode.
˜ Setting the time and date
1. Press the MODE button 6 three times. The sec-
ond field 5 and the day of the week field 1
flash in the display.
2. Press the START button 2 to set the second
field 5 to 0.
3. Press the RESET button 4 to confirm your set-
ting. The minute field flashes in the display.
4. Press the START button 2 to set the desired
minute value.
5. Press the RESET button 4 to confirm your
setting. The hour field flashes in the display.
6. Press the START button 2 to set the desired
hour value.
Note: Pay attention to the symbols A, P 9
and H 5 in the display when setting the hour
value. A and P (A = a.m. / P = p.m.) are used
for the 12-hour time format. H is used for the
24-hour format. Press the START button 2 to set
the desired value and format. Press the RESET
button 4 to confirm your setting.
7. Press the RESET button 4 to confirm your
setting. The date field flashes in the display.
8. Press the START button 2 to set the desired
date value.
GB/IE 25