Cleanmaxx Z 01375 Gebrauchsanleitung Seite 23

■ Before you start vacuuming, remove any large objects on the fl oor which could block
the suction tube, the suction hose or the nozzles. Switch the device off immediately
using the On / Off switch if the suction tube or the nozzles become blocked.
■ Remove and clean the dust container after each use (see the "Cleaning and Stor-
age" chapter).
■ Switch on the vacuum cleaner only when you have checked that all the parts have
been completely attached, and that the dust container and the fi lters have been
correctly inserted and are completely dry (for details of how to insert the dust container
and the fi lters, see the "Cleaning and Storage" chapter).
The items supplied include a carrying strap to make it easier to handle the vacuum
cleaner during use!
Use as a Hand-Held Vacuum Cleaner
1. Attach one of the accessory parts to the hand-held vacuum cleaner if necessary (see
the "Attaching / Changing Accessories" chapter).
2. Connect the mains plug of the hand-held vacuum cleaner to a mains socket that has
been properly installed.
3. Hold the hand-held vacuum cleaner fi rmly by the handle. If necessary, use the
carrying strap supplied to carry it.
4. Move the On / Off switch to the 1 position to switch on the device. The device will start
vacuum cleaning.
5. Move the device over the surface which is to be cleaned or guide the previously
selected accessory part over the surface which is to be cleaned.
6. Move the On / Off switch to the 0 position to switch off the device.
7. Empty the dust container regularly and store the vacuum cleaner away after use (see
the "Cleaning and Storage" chapter).
Use as a Blower
Please note that air will continue to be sucked in at the suction opening even
when you use the blower function! Make sure you do not accidentally suck up
any objects!
1. Attach the blower attachment to the hand-held vacuum cleaner (see the
"Attaching / Changing Accessories" chapter).
2. Connect the mains plug of the hand-held vacuum cleaner to a mains socket that has
been properly installed.
3. Hold the hand-held vacuum cleaner fi rmly by the handle or use the carrying strap
supplied to carry it.
4. Move the On / Off switch to the 1 position to switch on the device. The device will start
the blowing process.
5. Hold the extension hose towards the accumulation of dust and dirt that you want to
remove. The dirt will be blown away.
6. Move the On / Off switch to the 0 position to switch off the device.
23 EN