Cleanmaxx Z 01375 Gebrauchsanleitung Seite 17

Danger of Electric Shock and Fire
■ The device should only be connected to a properly installed plug socket with safety
contacts. The plug socket must also be readily accessible after connection so that
the connection to the mains can quickly be isolated. The mains voltage must match
the technical data of the device. Only use suitable extension cables whose technical
data is the same as that of the device.
■ Should the device fall into water, switch off the power supply immediately. Do not at-
tempt to pull the device out of the water while it is still connected to the mains power!
■ Never touch the device, mains cable or mains plug with wet hands when these
components are connected to the mains power.
■ Switch the device off and pull the mains plug out of the socket
– if you stop working with the device,
– before a thunderstorm,
– if a fault or error occurs while the device is in operation,
– if foreign bodies have found their way into the device.
■ Always pull the mains plug and never the mains cable.
■ Use the device only in closed rooms.
■ Do not use the device in rooms containing easily ignitable dust or poisonous and
explosive fumes.
Danger of fi re!
■
vicinity of combustible material.
Avoiding Damage to Material, Property and the Device
■ Always lay the cable of the adapter in such a way that it does not present a trip
hazard.
■ Make sure that the mains cable is not squashed, bent or laid over sharp edges and
does not come into contact with hot surfaces.
■ Maintain a suffi cient distance from heat sources such as hobs or ovens in order not
to damage the device. Do not place any naked fl ames, e.g. burning candles, in the
immediate vicinity of the device, cable, rechargeable battery or adapter.
■ Do not drop the device or allow it to be knocked violently.
■ Do not pull or carry the device by the cable of the adapter.
■ Do not expose the device to extreme temperatures, wide temperature variations,
moisture, wet conditions or direct sunlight.
■ Do not use any caustic or abrasive cleaning agents to clean the device. These can
damage the surface.
■ The device should only be used when it is fully and correctly assembled. The dust
container and the fi lters must be inserted. The fi lters must not be damaged!
■ Do not insert anything into the openings/nozzles of the device and make sure that
these do not become clogged.
■ Make sure that you do not suck up any large, bulky objects with the device. They
may become jammed and block the fl ow of air; larger objects should be removed
prior to vacuum cleaning.
Do not operate the device in a very damp environment or in the
17 EN