Items Included In The Delivery; Installation; Camera Housing - Santec VTC-249IRP/W Bedienungsanleitung

Bedienungsanleitung / User manual
VTC-249IRP/W

Items included in the delivery

1x Camera VTC-249IRP/W
1x Cable adapter BNC jack/plug
1x Allen wrench
1x Manual

1. Installation

(also see the following pages)
This compact camera comes in a weather-proof housing, IP-66, with wall bracket and
included cable management. It has been designed for video surveillance systems.
You will find the technical specifications at the end of this manual.
1.1 Bracket and camera installation
Make sure to fix the camera onto a solid basis which is capable to carry the weight of the
camera. Ensure that the camera is safely installed by using only suitable screws.
1.2 Power supply and monitor impedance
Only use a stabilized power supply unit with sufficient wattage (see chapter " Technical
specifications" for recommended power supply). Only approved cables should be used.
If a monitor is connected directly, the monitor impedance has to be set to 75 Ohm.
Verify the position of the switch in case the video picture is of poor quality.

1.3 Camera housing

Open the camera housing by turning it carefully counter-clockwise (see picture 1).
Pull off the housing from the camera module. Make sure not to damage the rubber gasket.
Improper handling of the appliance will invalidate the warranty.
_________________________________________________________________________________
- 28 -