Items Included In The Delivery; Installation; Camera Mounting; Power Supply And Monitor Impedance - Santec VCHD-2612IR Bedienungsanleitung

1. Items included in the delivery

1x Camera VCHD-2612IR
3x Screws and anchors
1x Housing opener
1x User manual

2. Installation

(Also see the pictures on the following pages.)
This camera is a day/night colour dome camera. It has been developed for indoor CCTV
applications.
You will find the technical data at the end of the manual.

2.1 Camera mounting

Make sure to fix the camera onto a solid basis which is capable to carry the weight of the
camera. If the supplied screws are not adequate, ensure that the camera is safely installed
by using only suitable screws.

2.2 Power supply and monitor impedance

Only use a stabilised 12 V DC or 24 V AC power supply unit with sufficient wattage (see
chapter "Technical specifications" for recommended power supply units).
Only approved cables should be used.
If a monitor is connected directly, the monitor impedance has to be set to 75 Ohm. Verify the
position of the switch in case the video picture is of poor quality.
Power supply and video output see picture 5.

2. 3 Camera housing

Open the camera housing by using the supplied opener. Put it into the housing's slit and
carefully pull the housing bubble off.
Close the camera housing by putting the bubble onto the camera module and pressing it.
Screws are not required.
Also see picture 4.
Improper handling of the appliance will invalidate the warranty.
_________________________________________________________________________________
- 24 -
Bedienungsanleitung / User Manual
VCHD-2612IR