Santec VTC-249IRP/W Bedienungsanleitung Seite 39

Bedienungsanleitung / User manual
VTC-249IRP/W
DNR (Digital Noise Reduction):
Adjust the noise reduction settings:
Low
Middle
High
Motion:
Adjust the motion settings:
_________________________________________________________________________________
Note:
If AGC is turned off, DNR is also disabled.
Sensitivity :
Set the sensitivity (0-20).
Area No:
Set the motion area number (1-4).
Area Use:
Adjust the motion detection area size.
Top/Bottom/Left/Right:
Adjust the position of the motion detection area.
- 39 -