IKEA Rengöra Bedienungsanleitung Seite 20

ENGLISH
Problem and alarm code
The program lasts too long.
Small leak from the appliance door.
The appliance door is difficult to close. • The appliance is not levelled. Loosen or tighten
Rattling/knocking sounds from inside
the appliance.
The appliance trips the circuit-beaker. • The amperage is insufficient to supply simulta-
Refer to "Before first use",
"Daily use", or "Hints and tips"
for other possible causes.
Once you have checked the appliance,
deactivate and activate the appliance. If
The washing and drying results are not satisfactory
Problem
Poor washing results.
Possible cause and solution
• If the delayed start option is set, cancel the de-
lay setting or wait for the end of the count-
down.
• The appliance is not levelled. Loosen or tighten
the adjustable feet (if applicable).
• The appliance door is not centred on the tub.
Adjust the rear foot (if applicable).
the adjustable feet (if applicable).
• Parts of the tableware are protruding from the
baskets.
• The tableware is not properly arranged in the
baskets. Refer to basket loading leaflet.
• Make sure that the spray arms can rotate free-
ly.
neously all the appliances in use. Check the
socket amperage and the capacity of the me-
ter or turn off one of the appliances in use.
• Internal electrical fault of the appliance. Con-
tact an Authorised Service Centre.
the problem occurs again, contact an
Authorised Service Centre.
For alarm codes not described in the table,
contact an Authorised Service Centre.
Possible cause and solution
• Refer to "Daily use", "Hints and tips" and basket
loading leaflet.
• Use more intensive washing programmes.
• Clean spray arm jets and filter. Refer to "Care and
Cleaning".
20