IKEA Rengöra Bedienungsanleitung Seite 11

ENGLISH
The indicators: ,
flashing.
2. Press .
The indicators: ,
The indicator still flashes.
The indicator shows the current setting.
If on = rinse aid empty notification is on, if
off = rinse aid empty notification is off.
3. Press to change the setting.
4. Press on/off to confirm and save the
setting.
Acoustic signals
Acoustic signals sound when a malfunction
of the appliance occurs. It is not possible to
deactivate these acoustic signals.
There is also an acoustic signal that sounds
when the programme is completed. By
default, this acoustic signal is activated and
it is possible to deactivate it.
In addition, an acoustic signal will sound
before the AutoOpen will open the door.
This acoustic signal stops only if AutoOpen
is deactivated.
When pressing the main switch to turn on
the dishwasher, it makes a short beep
sound. The beep is activated by default, but
it is possible to deactivate it together with
the end of programme acoustic signal.
How to deactivate the acoustic signals
Make sure the appliance is in the
programme selection mode.
1. To enter the user mode, press and hold
simultaneously
The indicators: ,
flashing.
2. Press .
The indicators: ,
The indicator still flashes.
, and start
and are off.
and .
, and start
and are off.
The indicator shows the current setting.
If on = the acoustic signal is active. If off =
the acoustic signal is disabled.
3. Press to change the setting.
4. Press on/off to confirm and save the
setting.
AutoOpen
AutoOpen improves the drying results with
less energy consumption.
During the drying phase, the
door opens automatically and
remains ajar.
Caution! Do not try to close the
appliance door within 2 minutes
after automatic opening. This can
cause damage to the appliance.
AutoOpen is automatically activated with
all programmes excluding
To avoid possible hazards inside
the appliance (such as knives,
sharp objects or chemicals) for
children, pets or people with
disabilities deactivate the
function.
11
.