Troubleshooting - IKEA Rengöra Bedienungsanleitung

ENGLISH
Cleaning the filter of the inlet hose
1
Close the water tap.
3
Clean the filter of
the inlet hose.
Cleaning the spray arms
Do not remove the spray arms. If the holes
in the spray arms are clogged, remove

Troubleshooting

If the appliance does not start or it stops
during operation, before you contact an
Authorised Service Centre, check if you can
solve the problem by yourself with the help
of the information in the table.
Warning! Repairs not properly
done may result in serious risk to
the safety of the user. Any
repairs must be performed by
qualified personnel.
2
A
Disconnect the hose.
Turn the fastener A
clockwise.
4
remaining parts of soil with a thin pointed
object.
External cleaning
• Clean the appliance with a moist soft
cloth.
• Only use neutral detergents.
• Do not use abrasive products, abrasive
cleaning pads or solvents.
Internal cleaning
• Carefully clean the appliance, including
the rubber gasket of the door, with a soft
damp cloth.
• If you regularly use short duration
programmes, these can leave deposits of
grease and limescale inside the
appliance. To prevent this, we
recommend to run long duration
programmes at least 2 times per month.
• To maintain the performance of your
appliance at its best, we recommend to
use monthly a specific cleaning product
for dishwashers. Follow carefully the
instructions on the packaging of the
product.
With some problems the end indicator
flashes intermittently indicating a
malfunction.
The majority of problems that can occur
can be solved without the need to contact
an Authorised Service Centre.
18