IKEA Rengöra Bedienungsanleitung Seite 10

ENGLISH
German degrees
(°dH)
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
<4
1) Factory setting.
2) Do not use salt at this level.
Whether you use a standard detergent or
multi-tabs (with or without salt), set the
proper water hardness level to keep the
salt refill indicator active.
Multi-tabs containing salt are not
effective enough to soften hard
water.
How to set the water softener level
Make sure the appliance is in the
programme selection mode.
1. Press and hold simultaneously
to enter the user mode.
The indicators: ,
flashing.
2. Press .
The indicators ,
The indicator still flashes.
The indicator starts flashing. The
number of flashes indicates the current
water softener setting (e.g. 5 flashes +
pause + 5 flashes... = level 5).
3. Press to change the setting. Each
pressing of the button
level number by one. After reaching
level 10, the count starts from level 1.
French degrees
(°fH)
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
<7
and
, and
and are off.
increases the
mmol/l Clarke de-
4.0 - 5.0
3.3 - 3.9
2.6 - 3.2
1.9 - 2.5
0.7 - 1.8
<0.7
4. Press on/off to confirm and save the
setting.
The rinse aid empty notification
The rinse aid helps to dry the dishes without
streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
When rinse aid chamber is empty, the rinse
aid indicator is turned on notifying to refill
rinse aid. If the drying results are
satisfactory while using multi-tablets only, it
is possible to deactivate the notification for
refilling rinse aid. However, for best drying
performance, always use rinse aid.
start
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse aid empty
notification
Make sure the appliance is in the
programme selection mode.
1. Press and hold simultaneously
to enter the user mode.
Water softener level
grees
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
10
6
1)
5
4
3
2
2)
1
and