Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning The Exhaust Fi Lter - Cleanmaxx Z 08938 Gebrauchsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Micro fi lter
Dust fi lter
B
9. Place the foam dust fi lter (B) back on the dust fi lter (A).
Plastic dust fi lter
10. Rinse the plastic dust fi lter and the dust bin cover out thoroughly with clean, lukewarm
water. ATTENTION: Do not in any case clean the fi lter in the dishwasher! Then shake
off any remaining water and let the fi lter air dry completely before reinstalling it.
11. Place the dust fi lter back in the dust bin cover and close it. The lever must audibly
lock into place.
12. Place the dust fi lter cover with the dust fi lter back in the dust bin and turn it until fi rm-
ly tightened. The cover is properly in place when the mark on the cover is pointing
towards the closed lock symbol on the dust bin.
13. Then insert the dust bin back in the device. Make sure that the dust bin locks into
place properly.
Cleaning the exhaust fi lter
The HEPA-exhaust fi lter is located in the compartment on the inside of the vacuum clea-
ner, under the dust fi lter (see chapter "Product contents and device overview", section
"Rear view").
5. Release the Velcro® of the microfi lter and remove it. If
necessary, rinse the micro fi lter out thoroughly with clean,
lukewarm water. ATTENTION: Do not in any case clean
the fi lter in the washing machine or dishwasher! Then
shake off any remaining water and let the fi lter air dry
completely before reinstalling it.
6. Open the dust bin cover by using the lever to push it up.
7. Take out the dust fi lter and the foam dust fi lter (B). If ne-
cessary, rinse the foam dust fi lter out thoroughly with
clean, lukewarm water. ATTENTION: Do not in any case
clean the fi lter in the washing machine or dishwasher!
Then shake off any remaining water and let the fi lter air
A
dry completely before reinstalling it.
8. The dust fi lter (A) may only be tapped out over a garbage
bin and not rinsed off with water.
14. Press the catch toward the compartment cover and re-
move the cover.
15. Remove the exhaust fi lter from the compartment and its
holder.
16. Tap the exhaust fi lter out over a garbage bin and brush
off any loose dirt. If necessary, wipe out the compartment
cover with a damp cloth.
28

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis