Fan Mode; Ventilation Mode - Sharp CV - P09FR Bedienungs Und Installationsanleitung Handbuch

FAN MODE

In this mode, the air conditioner simply circulates the air without cooling it.
Install the exhaust hose (See Page 8), turn the drainage nozzle to the CLOSE
position, and check the drainage nozzle is covered with the stopcock.

VENTILATION MODE

In this mode, the air conditioner ventilates the air to outdoors.
Install the exhaust hose (See Page 8), turn the drainage nozzle to the CLOSE
position, and check the drainage nozzle is covered with the stopcock.
1
Press the MODE button to select FAN mode.
COOL
2
2
Press the ON/OFF button to start operation.
• The red OPERATION lamp (
• The temperature cannot be set.
3
Press the FAN button to set the desired fan
speed.
1
QUIET
3
TO TURN OFF
Press the ON/OFF button again.
• The red OPERATION lamp (
1
Press the MODE button to select VENT mode.
COOL
2
2
Press the ON/OFF button to start operation.
• The red OPERATION lamp (
• The temperature cannot be set.
3
Press the FAN button to set the desired fan
speed.
1
• Although the louvers are closed and no air blows out
3
into the room, the external ventilation fan speed
changes.
QUIET
TO TURN OFF
Press the ON/OFF button again.
• The red OPERATION lamp (
E-11
DEHUM FAN VENT
) on the unit will light.
LOW HIGH
) on the unit will turn off.
DEHUM FAN VENT
) on the unit will light.
LOW HIGH
) on the unit will turn off.