Cool Mode - Sharp CV - P09FR Bedienungs Und Installationsanleitung Handbuch

COOL MODE

Install the exhaust hose (See Page 8), turn the drainage nozzle to the CLOSE
position, and check the drainage nozzle is covered with the stopcock.
1
1
Drainage nozzle
"CLOSE position"
Stopcock
2
3
2
3
4
1
4
TO TURN OFF
Press the ON/OFF button again.
• The red OPERATION lamp (
will turn off.
Press the MODE button to select COOL
mode.
COOL DEHUM
Press the ON/OFF button to start op-
eration.
• The red OPERATION lamp (
unit will light.
Press the TEMPERATURE button to set
the desired temperature.
• The temperature can be set within the range
of 18°C to 32°C.
Press the FAN button to set the de-
sired fan speed.
AUTO QUIET
E-9
FAN VENT
) on the
LOW HIGH
) on the unit