IKEA SMAKLIG Anleitung Seite 8

ENGLISH
Power management
The power management shares the maxi-
mum available power between two cooking
zones generating a pair (see picture). Boos-
ter function can cause, that the maximum
available power for a pair is exceeded.
Then the second cooking zone will be auto-
matically reduced to a lower power level.
The display for the reduced zone alternates
between selected and maximum available.
Using the Timer
Touch repeatedly until the pilot light of a
desired cooking zone displays. For exam-
ple, for the front left zone.
Touch or of the Timer to set the time
00 99
between and
lot light flashes more slowly, the time counts
down. Set the heat settings.
If the heat setting is set and the time set has
elapsed, acoustic signal appears,
es, and cooking zone switches off. If cooking
zone is not in use and the time set has
elapsed acoustic signal appears and
flashes.
minutes. When the pi-
00
flash-
00
Select for a cooking zone to switch off
the function, and the pilot light of the cook-
ing zone selected flashes faster. Touch
and the remaining time counts backwards
00
to . The pilot light goes out.
STOP+GO
The Stop+Go function sets all cooking zones
that operate to the lowest heat setting (
).
When Stop+Go operates, you cannot
change the heat setting.
The Stop+Go function does not stop the tim-
er function.
• To activate this function touch
symbol comes on.
• To deactivate this function touch
heat setting that you set before comes on.
Lock
When the cooking zones operate, you can
lock the control panel, but not
vents an accidental change of the heat set-
ting.
First set the heat setting.
To start this function touch
comes on for 4 seconds.
The Timer stays on.
To stop this function touch
ting that you set before comes on.
When you stop the appliance, you also stop
this function.
The child safety device
This function prevents an accidental opera-
tion of the appliance.
To activate the child safety device
• Activate the appliance with
set the heat settings.
• Touch
for 4 seconds. The symbol
comes on.
• Deactivate the appliance with
To deactivate the child safety device
• Activate the appliance with
set the heat settings. Touch
onds. The symbol
• Deactivate the appliance with
8
. The
. The
. It pre-
. The symbol
. The heat set-
. Do not
.
. Do not
for 4 sec-
comes on.
.