Care And Cleaning; What To Do If - IKEA SMAKLIG Anleitung

ENGLISH

Care and cleaning

Warning! Switch the appliance off and
let it cool down before you clean it.
Warning! For safety reasons, do not
clean the appliance with steam
blasters or high-pressure cleaners.
Warning! Sharp objects and abrasive
cleaning agents will damage the
appliance. Clean the appliance and
remove the residues with water and
washing up liquid after each use. Remove
also the remnants of the cleaning agents!
Scratches or dark stains on the glass
ceramic that cannot be removed do
not affect the functioning of the appliance.

What to do if...

Problem
The appliance cannot be
switched on or is not operat-
ing.
Acoustic signal sounds, ap-
pliance switches off.
Display is switching between
two heat settings.
lights up on the heat set-
ting display.
Removing the residues and stubborn
residues:
1. Food containing sugar, plastics, tin foil
2. Limescale rings, water rings, fat
Possible cause
More than 10 seconds have
passed since the appliance
was switched on.
The child safety device is
switched on .
Several sensor fields were
touched at the same time.
One or more sensor fields
have been covered for lon-
ger than 10 seconds.
Power management is re-
ducing the power of this
cooking zone.
Unsuitable cookware.
No cookware on the cook-
ing zone.
The diameter of the bottom
of the cookware is too small
for the cooking zone.
residues should be removed at once,
best tool for cleaning glass surface is a
scraper (not included with the appli-
ance). Place a scraper on the glass ce-
ramic surface at an angle and remove
residues by sliding the blade over the
surface. Wipe the appliance with a
damp cloth and a little washing up liq-
uid. Finally, rub the appliance dry using
a clean cloth.
splashes, shiny metallic discolorations
should be removed after the appliance
has cooled down using cleaner for
glass ceramic or stainless steel.
Switch the appliance on
again.
Deactivate child safety de-
vice (See the section "Child
safety device" ).
Only touch one sensor field.
Uncover sensor field.
See the section "Switching
the power function on and
off".
Use suitable cookware.
Place cookware on the
cooking zone.
Move onto a smaller cook-
ing zone.
10
Remedy