Startup / Operation - BOMANN GS 2196 Bedienungsanleitung

the other hinge side (2).
Turn in the feet accordingly.
• Replace the appliance upright. Put the appliance
door on the hinge pin and fix it in its intended po-
sition.
• Transfer the upper door hinge
and the screws on the respective
opposite appliance site. Put the
hinge pin in the hole of the appliance door and
tighten the screws.
• Replace the top cover,
which you have removed
at the beginning and
tight the screws.
• Check if the door is aligned vertically and horizon-
tally optimally so that the smooth opening and
closing of the door is guaranteed.
• Dismount the door handle and attach it to the
corresponding other door outer side. Refer to the
instructions in "Assembling the door handle".
Transfer the cover caps on the exposed holes to
the respective other door outer side.

Startup / Operation

Startup / Operation
Startup / Operation Startup / Operation
Prior to first use Prior to first use Prior to first use Prior to first use
CAUTION CAUTION CAUTION CAUTION: : : :
After transport, the appliance should be left standing
upright for about 4 hours before connecting to the
power supply. Nonobservance could lead to malfunc-
tion of the cooling system and causes an appliance
breakdown.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
the chapter "Cleaning and Maintenance".
Starting the appliance Starting the appliance
Starting the appliance Starting the appliance
• Connect the appliance to the power supply.
• Operate the temperature control. See also the
following section "Settings".
Settings Settings Settings Settings
The power levels [COLD–COLDER] regulates the
different values of the internal temperature.
Setting COLD Setting Setting Setting COLD COLD COLD Setting MID D D D Setting MI Setting MI Setting MI
Lowest setting
medium set-
(warmest inside
ting (optimal
temperature)
operating
temperature)
Note that the temperature will change depending on
the ambient temperature, frequency of door opening
and the amount of food in the appliance.
During initial operation, turn the temperature control
to the highest setting first, until the appliance has
reached the desired operating temperature. After-
wards it is recommended to turn the control back to a
medium setting; correcting the temperature at a later
point would then be easier.
Storing food Storing food Storing food Storing food
NOTE: Recommendation! NOTE: Recommendation!
NOTE: NOTE: Recommendation! Recommendation!
To guarantee that the temperature is low enough,
you should pre-cool the appliance a few times before
initial loading foods.
CAUTION: CAUTION:
CAUTION: CAUTION:
Always pay attention to the storage instructions on
the sales packaging.
The freezer allows you to store frozen food at
a temperature of -18°C or colder for several months;
to produce ice cubes and to freeze fresh food.
NOTE: NOTE:
NOTE: NOTE:
Make sure that the temperature in the freezer does
not rise above -18°C. For this, the unit should be
defrosted regularly.
18
Setting COLDER Setting Setting Setting COLDER COLDER COLDER
Highest setting
(coldest inside
temperature)