Use The Multiscreen Functions; Splitting The Screen - Pioneer PDP-507XA Bedienungsanleitung

Watching TV
06

Use the multiscreen functions

Splitting the screen

Use the following procedure to select 2-screen or picture-in-
picture mode.
NOTE
• Displaying a split screen for a long period of time, or for shorter
periods of time everyday, may result in image retention.
2-screen
Main screen
Picture-in-picture
Main screen
INPUT 5
P
1
Press c to select the display mode.
• Each time you press c, the display mode is switched
among 2-screen, picture-in-picture, and single-screen.
• In 2-screen or picture-in-picture mode, press
switch the position of the 2 screens shown.
The left screen (in the 2-screen mode) or the larger
screen (in the picture-in-picture mode) is the active
screen which will be indicated by "z". The user is
allowed to operate picture and sound.
24
En
Sub screen
Sub screen
DISC DVD HDD
NAVI
to
• In 2-screen mode, press f to change the size of the left
screen.
• In picture-in-picture mode, press
of the small screen anti-clockwise.
2
To select the desired input source, press the appropriate
input source button.
• If watching TV programmes, press P +/P – to change the
channel.
NOTE
• The multiscreen function cannot display images from the
same input source at the same time. If you make such an
attempt, a warning message appears.
• The multiscreen function cannot display images from
combinations of two external input sources (Input 1 to 5, PC).
It can display images from the following combinations of
input sources.
- Analogue TV and external source
(Input 1 to 5, PC)
• When you press HOME MENU the single-screen mode is
restored and the corresponding menu is displayed.
• When in the 2-screen mode, images displayed on the right
screen may look less fine, depending on the images.
• While in the 2-screen or picture-in-picture mode, the
analogue favourite channel list is not available.
• If you select 1920*1080P@24 Hz for the main screen in the
2-screen or picture-in-picture mode, video images may not
be displayed properly because of the system's capability.
• With headphones connected, you can listen to audio coming
from the sub screen when in the 2-screen or picture-in-
picture mode. For more information, see page 35.
• PAL 60 signals are not suited for image display on the sub
screen.
to move the position