Advanced Picture Adjustments; Using Purecinema; Using Colour Temp; Using Cti - Pioneer PDP-507XA Bedienungsanleitung

Basic Adjustment Settings
For PC source
Item
button
Contrast For less contrast
Brightness
For less brightness
Red
For weaker red
Green For weaker green
Blue For weaker blue
NOTE
• To perform advanced picture adjustments, select "Pro
Adjust" in step 3 and then press ENTER. For the subsequent
procedures, see "Advanced picture adjustments".
• To restore the factory defaults for all items, press
select "Reset" in step 3, and then press ENTER. A
confirmation screen appears. Press
then press ENTER.

Advanced picture adjustments

The Plasma Television provides various advanced functions for
optimizing the picture quality. For details on these functions,
see the tables.

Using PureCinema

1
Press HOME MENU.
2
then ENTER).
Select "Picture" ( /
3
Select "Pro Adjust" ( /
4
Select "PureCinema" ( /
5
Select the desired parameter ( /
• For the selectable parameters, see the table.
PureCinema
Automatically detects a film-based source (originally encoded at 24
frames/second), analyzes it, then recreates each still film frame for high-
definition picture quality.
Selections Off Deactivates the PureCinema.
Standard Produces smooth and vivid moving
images (film specific) by automatically
detecting recorded image information
when displaying DVD or high-definition
images (e.g., movies) having 24 frames
per second.
ADV Produces smooth and quality moving
images (as shown on theatre screens) by
converting to 72 Hz when displaying DVD
images (e.g., movies) having 24 frames
per second.
NOTE
• "Standard" is not selectable when 480p or 720p@60 Hz
signals are input.
• "ADV" is not selectable when PAL, SECAM, 576i, or
1080i@50 Hz signals are input.
• Neither "Standard" nor "ADV" is selectable when 576p,
720p@50 Hz, or 1080p@24 Hz signals are input.
button
For more contrast
For more brightness
For stronger red
For stronger green
For stronger blue
/ to
/ to select "Yes", and
then ENTER).
then ENTER).
then ENTER).

Using Colour Temp

1
Press HOME MENU.
2
then ENTER).
Select "Picture" ( /
3
Select "Pro Adjust" ( /
4
Select "Colour Detail" ( /
5
Select "Colour Temp" ( /
6
Select the desired parameter ( /
• If you have selected a desired parameter in this step,
skip steps 7 and 8.
• You may rather want to perform fine adjustment. To do
this, select "Manual" first and then press and hold
ENTER for more than three seconds. The manual
adjustment screen appears. Then go to step 7.
Colour Temp
Adjusts the colour temperature, resulting in a better white balance.
Selections High White with bluish tone
Mid-High Intermediate tone between High and Mid
Mid Natural tone
Mid-Low Intermediate tone between Mid and Low
Low White with reddish tone
Manual Colour temperature adjusted to your
preference
7
Select an item to be adjusted ( /
8
Select the desired level ( / ).
Item
button
R High Fine adjustment For weaker red
for bright
G High For weaker green
portions
B High
For weaker blue
R Low Fine adjustment For weaker red
for dark
G Low For weaker green
portions
B Low
For weaker blue
• To perform adjustment for another item, press RETURN,
and then repeat steps 7 and 8.
• You may press / to immediately change an item to
be adjusted.
9
Press HOME MENU to exit the menu.

Using CTI

1
Press HOME MENU.
2
then ENTER).
Select "Picture" ( /
3
Select "Pro Adjust" ( /
4
Select "Colour Detail" ( /
5
then ENTER).
Select "CTI" ( /
then ENTER).
then ENTER).
then ENTER).
then ENTER).
then ENTER).
button
For stronger red
For stronger green
For stronger blue
For stronger red
For stronger green
For stronger blue
then ENTER).
then ENTER).
08
31
En