Using The Multiscreen Functions - Pioneer pdp-42rxe Bedienungsanleitung

06 Basic Operations

Using the multiscreen functions

You can display a sub-picture within the main picture. In this
way you can watch a TV programme or monitor the video input
from any connected device while watching TV or another video
input.
Use this function following the procedures below to select the
Twin (2-screen) or PIP (picture in picture) mode.
• In the multiscreen function, the sound of a main input is always
output.
PIP (picture in picture)
Twin 1 (2-screen)
Main input
Twin 2 (2-screen)
Main input
1
Press the MENU button.
2
Press the c or d button to move to Screen, then press
the \ or OK button.
3 Press the c or d button to move to PIP/TWIN, then
press the \ or OK button.
Screen
Screen Size
Main Input
PIP/TWIN
AV1 Input
AV2 Output
Screen Saver
Move Enter
22
En
Main input Sub-picture
Sub-picture
Sub-picture
Full
ANALOG CH
VIDEO
ANALOG CH
Return
4 Select PIP/TWIN Mode and press the \ or OK button
again.
5
Press the c or d button to select the required option as
follows, then press the [ or the BACK button.
Off - PIP - TWIN1 - TWIN2
PIP/TWIN
PIP/TWIN Mode
PIP/TWIN Input
PIP Position
Adjust Return
• If you set to Off, the following steps are not available.
6 Press the c or d button to move to PIP/TWIN Input,
then press the \ or OK button.
7
Press the c or d button to select the required input
source as follows, then press [ or the BACK button.
ANALOG CH - AV1 - AV2 - AV3 - S-VIDEO - VIDEO -
COMPONENT - HDMI
PIP/TWIN
PIP/TWIN Mode
PIP/TWIN Input
PIP Position
Move Enter
• You can select the mode by simply pressing the
the remote control.
• You can select the source by simply pressing the
the remote control.
• In Twin or PIP mode, press the
of the 2-screen shown.
PIP Off
AV1
PIP
TWIN1
TWIN2
ANALOG CH
PIP AV 1
AV1
AV 2
AV 3
S-VIDEO
VIDEO
COMPONENT
HDMI
Cancel
button on
button on
button to switch the position