Herunterladen Inhalt Inhalt Diese Seite drucken

Parts Description; Technical Specifications; Delivery Contents - ULTIMATE SPEED ULG 12 B3 Bedienungs- Und Sicherheitshinweise

Kfz-ladegeraet mit starthilfefunktion
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

 Parts description
1
Digital display button
2
Battery type button
3
Charge start button
4
Fuse with cover
5
"+" pole connection cable (red)
6
"–" pole connection cable (black)
7
Mains cable
8
Digital display
 Technical specifications
Input voltage:
Return current*:
Nominal output voltage: 6 V/12 V
Charge current:
Battery type with:
Housing protection type: IP 20
* = Return current means the current that the char-
ger consumes from the battery when no mains
current is connected.
 Delivery contents
Check the scope of delivery and the
device as well as all parts for damage
right after unpacking. Do not take a
defective unit or parts into operation.
1 Charger Ultimate Speed ULG 12 B3
2 Quick contact connection terminals
(1 red, 1 black)
1 original operating instructions
Safety notes
KEEP OUT OF THE REACH
OF CHILDREN!
230 V~ 50 Hz
< 5 mA (no AC input)
2 A, 6 A, 12 A ± 10%
12 V/6 V and
8–180 Ah capacity
Introduction / Safety notes
DANGER! Avoid danger to
life and danger of injury from
improper use!
CAUTION! Do not operate the
device with a damaged cable,
mains cable or mains plug.
Damaged mains cables pose
danger to life from electric shock.
Have the mains cable only re-
paired by authorized and trained
specialists if there is any damage!
Contact the service point of your
country if you need any repair!
DANGER OF ELECTRIC
SHOCK! Ensure that the
vehicle is not in operation if the
battery is installed firmly in the
vehicle! Switch off the ignition and
put the vehicle into the parking
position, with the parking brake
engaged (e.g. car) or the rope
attached (e.g. electrical robot)!
DANGER OF ELECTRIC
SHOCK! Disconnect
the car charger from the mains
before removing the connection
terminals.
Connect the connection terminal
that is not connected to the car
body first.
Connect the other connection ter-
minal to the car body away from
the battery and the gasoline line.
Connect the car charger to the
supply grid only thereafter.
GB
7

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ian 290923

Inhaltsverzeichnis