Introduction; Intended Use; Scope Of Delivery; Parts Description - ULTIMATE SPEED ULGD 3.8 B1 Originalbetriebsanleitung

CAR BATTERY CHARGER
ULGD 3 .8 B1

Introduction

We congratulate you on the purchase of your new
device . You have chosen a high quality product .
The instructions for use are part of the product .
They contain important information concerning
safety, use and disposal . Before using the product,
please familiarise yourself with all of the safety in-
formation and instructions for use . Only use the unit
as described and for the specified applications .
If you pass the product on to anyone else, please
ensure that you also pass on all the documentation
with it .

Intended use

The Ultimate Speed ULGD 3 .8 B1 is a multi-stage
car battery charger that is suitable for charging
and trickle charging up of 6 V or 12 V lead-acid
batteries (batteries) with electrolyte solution (WET),
electrolyte absorbent mats (AGM) or gel electrolyte
(GEL) .
This appliance is not suitable for charging lithium-ion
batteries . The is not intended for commercial use
and is for indoor use only .
The manufacturer accepts no responsibility for
damage(s) arising out of usage contrary to the
instructions specified below .

Scope of delivery

1 Car battery charger
1 Instructions for use

Parts description

See Figure A:
12 V / 0 .8 A (Program 2)
12 V / 3 .8 A (Program 3)
12 V / 3 .8 A (Program 4)
6 V / 0 .8 A (Program 1)
LED reverse connection
LED stand-by
Charge display
Condition display
■ 12 │ GB │ IE
Voltage display
Program selection button (►►►)
See Figure B:
Charger
Stands
Mains lead
Positive pole clamp (red)
Negative pole clamp (black)
Positive pole connector cable (red)
Negative pole connector cable (black)

Technical Data

Rated voltage:
Rated power
consumption:
Rated output
DC voltage:
Rated output DC:
Fuse (internal):
Environmental
temperature:
Protection rating:
Protection class:
Battery types:

Safety

Safety instructions

WARNING!
► Read all safety warnings and all instructions .
Failure to follow the warnings and instruc-
tions may result in electric shock, fire and/or
serious injury .
This charger is suitable for indoor
use only .
220 - 240 V ∼ 50/60 Hz
(alternating current)
60 W
6 V / 12 V
(direct current)
0 .8 A / 3 .8 A
2 A T2A
0°C bis 40°C
IP 65
II / (double shielded)
6 V lead acid battery
1 .2 Ah - 14 Ah
12 V Lead acid battery
1 .2 Ah - 120 Ah
ULGD 3.8 B1