Dab Tuner Operations; Tuning In To An Ensemble And One Of The Services - JVC kd-lh1000r Bedienungsanleitung

DAB TUNER OPERATIONS

We recommend that you use DAB (Digital Audio
Broadcasting) tuner KT-DB1500 with your unit.
If you have another DAB tuner, consult your JVC
IN-CAR ENTERTAINMENT dealer.
• Refer also to the Instructions supplied with
your DAB tuner.
What is DAB system?
DAB is one of the digital radio broadcasting
systems available today. It can deliver CD
quality sound without any annoying
interference and signal distortion.
Furthermore, it can carry text, pictures and
data.
In contrast to FM broadcast, where each
programme is transmitted on its own
frequency, DAB combines several
programmes (called "services") to form one
"ensemble."
In addition, each "service"—called "primary
service"—can also be divided into its
components (called "secondary service").
With the DAB tuner connected with this unit,
you can enjoy these DAB services.
Note:
When reception switches between DAB and FM, the
listening volume level may increase or decrease
inconveniently. This change in the volume level results
from unequal audio injection levels at broadcaster
site, but not from the malfunction of this unit.
To prevent this inconvenience, you can adjust the DAB
input level (see page 24).
42
Tuning in to an ensemble and
one of the services
A typical ensemble has 6 or more programmes
(services) broadcast at the same time. After tuning
in to an ensemble, you can select a service you
want to listen to.
Before you start....
Press FM/AM DAB briefly if CD, CD changer or
external component is the current source.
1
Select the DAB tuner.
Each time you press and
hold the button, the DAB
tuner and the FM/AM tuner
are alternately selected.
Last received service of the selected band is tuned
in.
2
Select the DAB band (DAB1, DAB2
or DAB3).
Each time you press the
button, the DAB band
changes as follows:
DAB1
Note:
This receiver has three DAB bands (DAB1, DAB2,
DAB3). You can use any one of them to tune in to
an ensemble.
DAB FM/AM
DAB2 DAB3