JVC kd-lh1000r Bedienungsanleitung Seite 26

5
Make adjustments as you like,
referring to the table "Sound
adjustment items."
Buttons used for adjustments
1) Press ¢
the frequency band—Low, Mid,
or High.
2) Turn the control dial to select the
center frequency for the selected
band.
3) Press 5 (up) or ∞ (down) to
adjust the level of the selected
band.
4) Press SEL (select) to enter the Q
level (band width) adjustment
mode for the selected band.
5) Turn the control dial to adjust the
Q level for the selected band.
6) Repeat steps 1) to 5) to adjust
the other frequency bands.
6
Exit from the sound adjustment mode.
The confirmation message
appears—whether you want to
store the adjustment.
If you want to cancel the adjustments,
press any button other than SEL (select).
26
or 4
to select
7
Select one of the user sound modes
(User 1, User 2, User 3).
8
Store the adjustment in the selected
user sound mode.
Ex.: When you have selected "User 1"
Sound adjustment items
Band Low
50 Hz
Center
80 Hz
frequency
120 Hz
Q1 (min.)
Q
|
(band width)
Q4 (max.) Q2 (max.)
–06 (min.) –06 (min.)
Level
|
+06 (max.) +06 (max.) +06 (max.)
Selectable values
Mid High
700 Hz 8 kHz
1 kHz 12 kHz
2 kHz
Q1 (min.)
| (Fixed)
–06 (min.)
| |