Basic Operations; Turning On The Power - JVC kd-lh1000r Bedienungsanleitung

1

Turning on the power

1
Turn on the power.
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Select the source.
To operate the tuner (FM or AM),
see pages 9 – 19.
To play a CD,
see pages 20 – 23.
To operate the CD changer,
see pages 37 – 40.
To operate the external component
(Line In), see page 41.
To operate the DAB tuner,
see pages 42 – 46.
CAUTION on Volume Setting:
Discs produce very little noise compared with
other sources. If the volume level is adjusted for
the tuner, for example, the speakers may be
damaged by the sudden increase in the output
level. Therefore, lower the volume before playing a
disc and adjust it as required during playback.

BASIC OPERATIONS

2
3
3
Adjust the volume.
Volume level appears
4
Adjust the sound as you want.
(See pages 24 – 27.)
To drop the volume in a moment
Press briefly while listening to any
source. "ATT" starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
• If you turn the control dial, you can also restore
the sound.
To turn off the power
Press for more than one second.
• If you turn off the power while listening to a
disc, CD play will start from where playback
has been stopped previously, next time you
turn on the power.
Note:
When you use this unit for the first time, set the
built-in clock correctly, see page 28.
To increase the volume.
To decrease the volume.
7