Dab Tuner Operations; To Tune In To An Ensemble Manually - JVC KD-G431 Bedienungsanleitung

Indications
IF BAND
Intermediate frequency
band
* 1
If the power supply is not interrupted by turning off the ignition key of your car, it is recommended to select "OFF" to
save the car's battery.
2
* Only for FM RDS stations.
* 3
Depends on the amplifier gain control.
* 4
Displayed only when DAB tuner is connected.
* 5
Some characters or symbols will not be shown correctly (or will be blanked) on the display.
* 6
Displayed only when one of the following sources is selected—FM, AM, CD, or AUX IN.

DAB tuner operations

What is DAB system?
Digital Audio Broadcasting (DAB) can deliver digital
quality sound without any annoying interference
and signal distortion. Furthermore, it can carry text,
pictures, and data. When transmitting, DAB combines
several programmes (called "services") to form one
"ensemble." In addition, each "service"—called
"primary service"—can also be divided into its
components (called "secondary service"). A typical
ensemble has six or more programmes (services)
broadcast at the same time.
By connecting the DAB tuner, this unit can do the
following:
• Tracing the same programme automatically
—Alternative Frequency Reception (see "DAB AF" on
page 14).
It is recommended to use DAB tuner KT-DB1000
with your unit. If you have another DAB tuner,
consult your JVC IN-CAR ENTERTAINMENT dealer.
• Refer also to the Instructions supplied for your DAB
tuner.
~
Ÿ
Item Selectable settings, [reference page]
( : Initial)
• AUTO : Increases the tuner selectivity to reduce interference noises
between close stations. (Stereo effect may be lost.)
• WIDE : Subject to the interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
!
Start searching for an ensemble.
When an ensemble is received,
searching stops.
To stop searching, press the
same button again.
⁄
Select a service (either primary or
secondary) to listen to.

To tune in to an ensemble manually

Start searching for an ensemble, as in step
1
2
Select a desired ensemble frequency.
!
above...
15