Attaching The Lashing Strap - Powerfix Z28970A-02 Bedienungsanleitung

the loading area (see Fig. B).

Attaching the lashing strap

Q
The selected lashing equipment must be strong and long enough for
the intended purpose and have the correct length for the type of
lashing. Responsible users plan cargo security in advance: they plan
the attachment and removal of the lashing devices before the start of
the journey. With longer trips, partial unloading must be considered.
Calculate the number of lashing devices according to EN 12195-1.
Only lashing systems labelled for lashing down with STF (standard
tension force) may be used for friction lashing.
j Loop the lashing strap around the load.
j Press the clamping lock
through the clamping lock from below (see Fig. A).
Carefully pull the webbing
j
you get the tension you want. Then release the clamping lock
16 GB/IE
106714-Z29870A-02_GB_IE_Content.indd 16
down and pass the webbing
1
through the clamping lock until
2
2
.
1
11/21/2014 6:03:08 PM