Attaching The Repair Device; Mounting The Magnifying Glass; Use; Using The Precision Engineer's Led Magnifying Glass - Powerfix Z30225 Bedienungsanleitung

Before Initial Use / Use
12 GB/IE
66454_pow_Feinmechaniker_LED_Lupe_content_LB3.indd 12

Attaching the repair device

Push the fixing clamp
the desired height and tighten the fastening screw
clockwise.
Insert the ball joint of the repair device
corresponding recess of the fixing clamp
Fix the repair device
ing screw clockwise.
16

Mounting the magnifying glass

Push the fixing clamp
set the desired height. Tighten the fastening screw
turning it clockwise.
Insert the ball joint
and tighten the fastening screw
clockwise (Fig. A).

Use

Using the Precision Engineer's LED
Magnifying Glass
T urn the retaining screws
clockwise direction. Clamp the item to be repaired with
the alligator clips
onto the mounting rod
11
in place by tightening the fasten-
15
on to the mounting rod
7
into the corresponding recess
5
for the ball joint
6
on the alligator clips
19
in the repair device
18
, set
10
12
into the
15
.
11
and
10
by
8
5
in a
18
.
15
25.05.11 17:35