What To Do If; Possible Cause - Electrolux EOO3410 Benutzerhandbuch

Installing the door and the glass panels
A

10. WHAT TO DO IF...

WARNING!
Refer to the Safety chapters.
The hob cooking zones
do not operate.
The oven does not heat
up.
The oven does not heat
up.
The oven does not heat
up.
The oven does not heat
up.
B C
Problem
When the cleaning is completed, install
the glass panels and the oven door. Do
the above steps in the opposite se-
quence.
Make sure that you put the glass panels
(A, B and C) back in the correct se-
quence. The middle panel (B) has a deco-
rative frame. The screen-printing zone
must face the inner side of the door.
Make sure that after the installation the
surface of the glass panel frame (B) on the
screen-printing zones is not rough when
you touch it.
Make sure that you install the top panel in
the seats correctly.

Possible cause

Refer to the user manual for the hob.
The appliance is deacti-
vated.
The clock is not set.
The necessary settings
are not set.
The automatic switch-off
is on.
ENGLISH
Remedy
Activate the appliance.
Set the clock. Refer to
"Setting the time of day".
Make sure that the set-
tings are correct.
Refer to "Automatic
switch-off".
23