Clock Functions; Setting The Minute Minder - Electrolux EOO3410 Benutzerhandbuch

10 www.electrolux.com

6. CLOCK FUNCTIONS

Sym-
bol
Press
change the clock function.
Press
of the clock functions, or wait 5
seconds for the setting to be con-
firmed automatically.
6.1 Setting the Duration or End
function
1.
Press
symbol
play.
2. Press + or - to set the minutes.
3.
Press
4. Press + or - to set the hour.
5.
Press
6. When the set time ends, the symbol
acoustic signal sounds for two mi-
nutes. The appliance deactivates.
Press a button or open the appliance
door to stop the signal.
If you press
time for Duration
ance switches to setting the End

6.2 Setting the Minute Minder

Used to set a countdown time. The maxi-
mum time you can set is 2 hours 30 mi-
nutes. This function has no effect on the
Function
Minute Minder To set a countdown time.
Time of day To set, change or check the time of day. Refer to "Set-
ting the time of day".
Duration To set how long the appliance must operate. First set an
oven function before you set this function.
End To set when the appliance must be deactivated. First set
an oven function before you set this function. You can
use Duration and End at the same time (Time Delay) to
set the time when the appliance must be activated and
then deactivated.
again and again to
to confirm the settings
again and again until the
or flashes in the dis-
to confirm.
to confirm.
or and the set time flash. The
while setting the
function.
operation of the oven. You can set the Mi-
nute Minder at any time, also if the appli-
ance is off.
1.
2.
3.
4.
6.3 Count Up Timer
Use the Count Up Timer to monitor how
long the oven operates. It is on immedi-
, the appli-
ately when the oven starts to heat.
To reset the Count Up Timer, press and
hold + and -. The timer starts to count up
again.
Description
Press again and again until
00 flash in the display.
Press + or - to set the Minute Minder.
At first the time is calculated in mi-
nutes and seconds. When the time
you set is longer than 60 minutes, the
symbol comes on in the display.
The appliance then calculates the
time in hours and minutes.
The Minute Minder starts automatical-
ly after five seconds.
When the set time ends, the acoustic
signal sounds for two minutes. 00:00
and flash in the display. Press a
button to stop the signal.
If you set the Minute Minder when
the Duration
tion operates, the symbol
comes on in the display.
You cannot use the Count Up
Timer when the Duration
End function operates.
and
or End func-
or